ocoge/local_modules/pigpio/index.js

module.exports = require('bindings')('pigpio');

// module.exports.INPUT = 0;
// module.exports.OUTPUT = 1;
// module.exports.PUD_OFF = 0;
// module.exports.PUD_DOWN = 1;
// module.exports.PUD_UP = 2;
module.exports.SET_PULL_UP = 2;
module.exports.SET_PULL_DOWN = 1;
module.exports.SET_PULL_NONE = 0;

let pi = -1;
// let i2c_hand = -1;
// let ser_hand = -1;
module.exports.gpio_start = async (host = 'localhost', port = 8888, show_errors = true) => {
    if (pi < 0) {
        pi = await module.exports._gpiod_start(host, port.toString());
        if (pi < 0) {
            if (show_errors) console.log(pi);
        }
    }
    return pi;
}
module.exports.gpio_stop = async () => {
    if (pi >= 0) await module.exports._gpiod_stop(pi);
    pi = -1;
}
module.exports.gpio_set_output = async gpio => {
    if (pi >= 0) return await module.exports._set_mode(pi, gpio, 1);
}
module.exports.gpio_set_input = async (gpio, mode) => {
    if (pi >= 0) {
        let r = await module.exports._set_mode(pi, gpio, 0);
        if (r == 0)
            return await module.exports._set_pull_up_down(pi, gpio, mode);
        else
            return r;
    }
}
module.exports.gpio_read = async gpio => {
    if (pi >= 0) return await module.exports._gpio_read(pi, gpio);
}
module.exports.gpio_write = async (gpio, value) => {
    if (pi >= 0) return await module.exports._gpio_write(pi, gpio, value);
}
module.exports.servo = async (gpio, pulse_width) => {
    if (pi >= 0) return await module.exports._set_servo_pulsewidth(pi, gpio, pulse_width);
}
module.exports.pwm = async (gpio, pwm_frequency, pwm_duty_cycle) => {
    if (pi >= 0) {
        await module.exports._set_PWM_frequency(pi, gpio, pwm_frequency);
        await module.exports._set_PWM_dutycycle(pi, gpio, pwm_duty_cycle);
    }
}
module.exports.serial_open = async (tty, baud) => {
    if (ser_hand >= 0) await module.exports._serial_close(pi, ser_hand); // 勝手に閉じる
    ser_hand = await module.exports._serial_open(pi, tty, baud);
    return ser_hand;
}
module.exports.serial_close = async () => {
    if (ser_hand >= 0) await module.exports._serial_close(pi, ser_hand);
    ser_hand = -1;
}
module.exports.serial_write = async data => {
    if (ser_hand >= 0) return await module.exports._serial_write(pi, ser_hand, Buffer.from(data));
}
module.exports.serial_read = async count => {
    if (ser_hand >= 0) return new TextDecoder().decode(await module.exports._serial_read(pi, ser_hand, count));
    // if (ser_hand >= 0) return await module.exports._serial_read(pi, ser_hand, count);//.toString('utf8');
}
module.exports.i2c_open = async (i2c_bus, i2c_address) => {
    if (i2c_hand >= 0) await module.exports._i2c_close(pi, i2c_hand); // 勝手に閉じる
    i2c_hand = await module.exports._i2c_open(pi, i2c_bus, i2c_address);
    return i2c_hand;
}
module.exports.i2c_close = async () => {
    if (i2c_hand >= 0) await module.exports._i2c_close(pi, i2c_hand);
    i2c_hand = -1;
}
module.exports.i2c_write_byte_data = async (reg, byte_val) => {
    if (i2c_hand >= 0) return await module.exports._i2c_write_byte_data(pi, i2c_hand, reg, byte_val);
}
module.exports.i2c_read_byte_data = async reg => {
    if (i2c_hand >= 0) return await module.exports._i2c_read_byte_data(pi, i2c_hand, reg);
}
module.exports.i2c_write_i2c_block_data = async (reg, data) => {
    if (i2c_hand >= 0) return await module.exports._i2c_write_i2c_block_data(pi, i2c_hand, reg, Buffer.from(data));
}
module.exports.i2c_read_word_data = async reg => {
    if (i2c_hand >= 0) return await module.exports._i2c_read_word_data(pi, i2c_hand, reg);
}
module.exports.i2c_read_device = async count => {
    if (i2c_hand >= 0) return new TextDecoder().decode(await module.exports._i2c_read_device(pi, i2c_hand, count));
    // if (i2c_hand >= 0) return await module.exports._i2c_read_device(pi, i2c_hand, count).toString('utf8');
}
module.exports.i2c_write_device = async data => {
    if (i2c_hand >= 0) return await module.exports._i2c_write_device(pi, i2c_hand, Buffer.from(data));
}
// 終了処理
module.exports.close_all_handle = () => {
    module.exports.serial_close();
    module.exports.i2c_close();
    module.exports.gpio_close();
}