module.exports = require('bindings')('pigpio');

// module.exports.INPUT = 0;
// module.exports.OUTPUT = 1;
// module.exports.PUD_OFF = 0;
// module.exports.PUD_DOWN = 1;
// module.exports.PUD_UP = 2;
module.exports.PULL_UP = 2;
module.exports.PULL_DOWN = 1;
module.exports.PULL_NONE = 0;


let pi = -1;
let i2c_hand = -1;
let ser_hand = -1;
module.exports.gpio_open = () => {
    if (pi < 0) pi = module.exports._pigpio_start('', '');
    return pi;
}
module.exports.gpio_close = () => {
    if (pi >= 0) module.exports._pigpio_stop(pi);
    pi = -1;
}
module.exports.gpio_set_output = gpio => {
    if (pi >= 0) return module.exports._set_mode(pi, gpio, 1);
}
module.exports.gpio_set_input = (gpio, mode) => {
    if (pi >= 0) {
        let r = module.exports._set_mode(pi, gpio, 0);
        if (r == 0)
            return module.exports._set_pull_up_down(pi, gpio, mode);
        else
            return r;
    }
}
module.exports.gpio_read = gpio => {
    if (pi >= 0) return module.exports._gpio_read(pi, gpio);
}
module.exports.gpio_write = (gpio, value) => {
    if (pi >= 0) return module.exports._gpio_write(pi, gpio, value);
}
module.exports.servo = (gpio, pulse_width) => {
    if (pi >= 0) return module.exports._set_servo_pulsewidth(pi, gpio, pulse_width);
}
module.exports.pwm = (gpio, pwm_frequency, pwm_duty_cycle) => {
    if (pi >= 0) {
        module.exports._set_PWM_frequency(pi, gpio, pwm_frequency);
        module.exports._set_PWM_dutycycle(pi, gpio, pwm_duty_cycle);
    }
}
module.exports.serial_open = (tty, baud) => {
    if (ser_hand >= 0) module.exports._serial_close(pi, ser_hand); // 勝手に閉じる
    ser_hand = module.exports._serial_open(pi, tty, baud);
    return ser_hand;
}
module.exports.serial_close = () => {
    if (ser_hand >= 0) module.exports._serial_close(pi, ser_hand);
    ser_hand = -1;
}
module.exports.serial_write = data => {
    if (ser_hand >= 0) return module.exports._serial_write(pi, ser_hand, Buffer.from(data));
}
module.exports.serial_read = count => {
    if (ser_hand >= 0) return module.exports._serial_read(pi, ser_hand, count).toString('utf8');
}
module.exports.i2c_open = (i2c_bus, i2c_address) => {
    if (i2c_hand >= 0) module.exports._i2c_close(pi, i2c_hand); // 勝手に閉じる
    i2c_hand = module.exports._i2c_open(pi, i2c_bus, i2c_address);
    return i2c_hand;
}
module.exports.i2c_close = () => {
    if (i2c_hand >= 0) module.exports._i2c_close(pi, i2c_hand);
    i2c_hand = -1;
}
module.exports.i2c_write_byte_data = (reg, byte_val) => {
    if (i2c_hand >= 0) return module.exports._i2c_write_byte_data(pi, i2c_hand, reg, byte_val);
}
module.exports.i2c_read_byte_data = reg => {
    if (i2c_hand >= 0) return module.exports._i2c_read_byte_data(pi, i2c_hand, reg);
}
module.exports.i2c_read_device = count => {
    if (i2c_hand >= 0) return module.exports._i2c_read_device(pi, i2c_hand, count).toString('utf8');
}
module.exports.i2c_write_device = data => {
    if (i2c_hand >= 0) return module.exports._i2c_write_device(pi, i2c_hand, Buffer.from(data));
}
// 終了処理
module.exports.close_all_handle = () => {
    module.exports.serial_close();
    module.exports.i2c_close();
    module.exports.gpio_close();
}